Super Stock is built for experienced racers looking to unleash the full performance potential of their Mini-Z. Featuring the upgraded Kyosho XSPEED motor and less restrictions on tuning options, racers have significantly more freedom to optimize their setup for maximum performance.
Higher speeds, advanced tuning, and serious competition make Super Stock the ultimate class for racers ready to push their Mini-Z—and themselves—to the limit.
Chassis:
Kyosho MR-04 RWD Chassis Only
Allowed Wheelbases: RWD 90mm, 94mm, 98mm and 102mm
Tuning weights allowed
Electronics:
Car Must be in full-speed mode
Kyosho XSPEED Motor (MZW301) must be used
Stock ESC Board must be used
EasyLap Transponder must be used
Open Transmitter
Permitted Modifications:
20 gauge motor wire allowed
OK to remove safety switch from motor
Not Allowed:
Built-In or Separate Gyro
Gear Ratio:
Open
Wheels:
All brand plastic and aluminum 1/28 scale production wheels allowed
Size Limitations:
Maximum Front wheel width: 8.5mm (excluding outer flange/disk.)
Maximum Rear wheel width: 11mm (excluding outer flange/disk.)
Wheel Diameter: 19-20mm
Wheels must fit inside the body
Tires:
Rubber tires only
Maximum tire diameter (mounted): 25.5mm
Maximum front tire width: 8.5mm
Maximum rear tire width: 11mm
Tires may be cleaned with 70% alcohol solution or water
Not allowed:
Tire additive or traction compound
Tire Warmers
Homemade tires
Batteries:
Cars must be powered by 4 AAA batteries
Ni-MH or Ni-Cd cell-type only
Body & Wing:
Any manufactured molded hard shell that fits the allowed wheelbase
Permitted Modifications:
Lexan roof/windows
Front splitter may be shaved to reduce the chances of snagging on track barriers
Standard rear wing for corresponding body may be used with no height limit
Custom aftermarket lexan or plastic wings must meet 45mm height limit from ground
Permitted Option Parts:
Open